|
|
Bronx - address substitution (reconstruction house of correction)
Kozel, Ondřej ; Pokorný, Filip (referee) ; Havliš, Karel (advisor)
The subject of this graduation thesis is a conceptual architectural study of the former house of correction extension, annex and reconstruction and also a new ideological solution of adjacent areas and total building plan . The house is located in the Brno’s Bronx district. The reconstruction is focused on the use of alternative housing concepts with the general target at the whole city quarter reneration – address change.
|
|
|
BUT Center for Technology Transfer
Driják, Ondřej ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
The building, as a subject of the bachelor project. Industrial building that is supposed to be a place for new technologies, new machinery and new chemical elements, invented by the students of the Brno technical university. The shape of the building was being developed gradually. First sketches were originated at the atelier, the origin of the building was given the shape according to the estate. After the complex project was selected by the university, the facade and the disposition of the building have been further developed up to the final state. The building is divided into three parts: administrative, laboratory and technological. The special feature is that all the floors are not on the same level. The administrative and the laboratory parts are on the same level, and have three floors. Technological part has two floors, with completely flexible access of the cargo elevator. The basement is used as a parking area for employees. The roof has a surface with the skylight installations. I was working on the project by myself, with the help of professor A. Novy CSc. And M .Novotny CSc. For this project I used Neuferts documents and CSN, including the materials from the lectures of industrial building. As an architect I was supposed to create an architectural project on the above mentioned theme “Form construction and function”
|
|
|
Woman´s Clothing Factory
Kovářová, Hana ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The women´s clothing factory is situated in the city part Brno-Židenice in the area of one so called „brownfields“. Currently there are rusty storages and old garages standing in the building ground. The site is bordered by several streets – it is Rokytova street, Komprdova street and Údolíček street – and the fourth side is closed by boundaries of a cemetery. The area can be entered from the north-west street Údolíček. According to the ground plan, its location is temporary, so we changed it a little to better match the needs of the company. The entrance for pedestrians is situated at the north-west too. And there are also parking places and other necessary manipulation space situated on the grounds. The clothing factory is aimed at production of Giorgio Armani´s women confection so the architectural solution is based on the basic philosophy of the company. Their models are famous for their simple design with a patterned fabric that make them special. So the basic mass of the object is a simple block, which is sensitively placed at the surrounding landscape and which is made special by the parts of ovals that are embedded or comming out of the basic mass. These parts of ovals create both – resting and functional spaces. The strong horizontal character is broken by a cylindrical body stucked into the basic shape that surmounts the block by one floor. A big part of the production hall is glassed-in so we can get enough light into the interier and the employees can be in touch with the surrounding. There is a facade net strunged in front of the glass facade. The net limits overheating and also plays the role of the unifying element. The building integrates a producion hall, storages, sanitary rooms, administrative space, canteen with affilated spaces and energy traffic necessary for running the factory. The wing cell is a steel skeleton combined with reinforced concrete circumferential wall and tie brick walls.
|
|
|
The project documentation of one-floor, non-cellar villa with residential attic. (up hill)
FRÁNA, Jiří
Objective of the thesis is working-out of family house project documentation. The project is based on the local plan of the village Svatý Jan nad Malší. Proposal is made in two variations - A and B. Project is worked-out according to the variation A and elaborated in a range for issuing building licence due to the public notice MMR 132/1998 Sb. The designed house has rectangular platform and is situated in a sloped parcel. It has one floor and residental attic,saddle roof of wooden binding rafter with isolation between rafters. With its architectural design bulding is similar to the surrounding estatement and doesn´t affect scenery character.
|
|
|
The liturgical objects of the Church of Our Lady Victorious in Prague designed by Otmar Oliva
Pilařová, Kateřina ; Jarošová, Markéta (advisor) ; Oulíková, Petra (referee)
Anotace: Bakalářská práce se zabývá novodobým liturgickým vybavením v kostele Panny Marie Vítězné a sv. Antonína Paduánského na Malé Straně, které navrhl a zhotovil český akademický sochař Otmar Oliva. Ten pro karmelitský kostel vytvořil nový oltář, ambon, kříž, křtitelnici s kropenkou v jednom a další liturgické předměty, které byly završeny slavnostním obřadem svěcení dne 18. října 2015. Práce má za cíl představit sochaře Otmara Olivu a seznámit s jeho pracemi pro kostel Panny Marie Vítězné. Tato práce je zaměřena v kontextu se zajímavou historií kostela, která je rovněž spjatá s historií naší země. Část práce se věnuje údajům od založení luteránského kostela Nejsvětější Trojice, a kdy po jejich vypovězení po bitvě na Bílé Hoře získali stavbu bosí karmelitáni. Dále se zaměřuje na samotnou architekturu kostela, na jeho interiér a vnitřní vybavení.
|
|
|
Bronx - address substitution (reconstruction house of correction)
Kozel, Ondřej ; Pokorný, Filip (referee) ; Havliš, Karel (advisor)
The subject of this graduation thesis is a conceptual architectural study of the former house of correction extension, annex and reconstruction and also a new ideological solution of adjacent areas and total building plan . The house is located in the Brno’s Bronx district. The reconstruction is focused on the use of alternative housing concepts with the general target at the whole city quarter reneration – address change.
|
|
|
BUT Center for Technology Transfer
Driják, Ondřej ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
The building, as a subject of the bachelor project. Industrial building that is supposed to be a place for new technologies, new machinery and new chemical elements, invented by the students of the Brno technical university. The shape of the building was being developed gradually. First sketches were originated at the atelier, the origin of the building was given the shape according to the estate. After the complex project was selected by the university, the facade and the disposition of the building have been further developed up to the final state. The building is divided into three parts: administrative, laboratory and technological. The special feature is that all the floors are not on the same level. The administrative and the laboratory parts are on the same level, and have three floors. Technological part has two floors, with completely flexible access of the cargo elevator. The basement is used as a parking area for employees. The roof has a surface with the skylight installations. I was working on the project by myself, with the help of professor A. Novy CSc. And M .Novotny CSc. For this project I used Neuferts documents and CSN, including the materials from the lectures of industrial building. As an architect I was supposed to create an architectural project on the above mentioned theme “Form construction and function”
|
|
|
Woman´s Clothing Factory
Kovářová, Hana ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The women´s clothing factory is situated in the city part Brno-Židenice in the area of one so called „brownfields“. Currently there are rusty storages and old garages standing in the building ground. The site is bordered by several streets – it is Rokytova street, Komprdova street and Údolíček street – and the fourth side is closed by boundaries of a cemetery. The area can be entered from the north-west street Údolíček. According to the ground plan, its location is temporary, so we changed it a little to better match the needs of the company. The entrance for pedestrians is situated at the north-west too. And there are also parking places and other necessary manipulation space situated on the grounds. The clothing factory is aimed at production of Giorgio Armani´s women confection so the architectural solution is based on the basic philosophy of the company. Their models are famous for their simple design with a patterned fabric that make them special. So the basic mass of the object is a simple block, which is sensitively placed at the surrounding landscape and which is made special by the parts of ovals that are embedded or comming out of the basic mass. These parts of ovals create both – resting and functional spaces. The strong horizontal character is broken by a cylindrical body stucked into the basic shape that surmounts the block by one floor. A big part of the production hall is glassed-in so we can get enough light into the interier and the employees can be in touch with the surrounding. There is a facade net strunged in front of the glass facade. The net limits overheating and also plays the role of the unifying element. The building integrates a producion hall, storages, sanitary rooms, administrative space, canteen with affilated spaces and energy traffic necessary for running the factory. The wing cell is a steel skeleton combined with reinforced concrete circumferential wall and tie brick walls.
|
guest ::
